A Dreamy DIY Nursery on a Budget Continued: DIYs #4 and 5.
When I wrote my original post sharing the look I went for while decorating Ruby's room: A Dreamy Nest for Ruby, I didn't actually realize how many projects I did in such a short time (it was my goal for July to get the room prepared for her August 8th arrival- which ended up being an August 2 surprise.) There ended up being far too many for one post, so I was only able to detail DIYs 1-3.
Here's the 2nd of 3 installments to finish up some of the cheap and easy crafts I used to keep my second little girls nursery on a budget. This next one is my FAVE as it only cost me $11.99 and took about 10-15 minutes.
I've mentioned that in a previous life, this room was my husband's "Yankee Room" and man cave. The shelf above was originally purchased to hold a cable box and DVD player, later relocated to that exact spot, and was half way out the door before I realized that I didn't have a book shelf for the baby's room. This is where I pat myself on the back, because when I say I decorated this room on a budget I don't mean I didn't spend some money- there's no way I could resist the urge to accessorize at Home Goods (I purchased the bird cage shelf, the "Love" canvas quote, the lamp and the little ceramic bird house for about $150: see the pic here)
At first I was going to spray paint it, but there was the minor complication that I was pregnant and probably shouldn't be inhaling all that. Then I had a "liiiiightbuulb" moment <channeling Gru from Despicable Me...ignore me if you have no clue what I'm talking about. That movie was on a repeat here in the Hawthorne household for about a month. It's cute (the first 55 times...)>
I Googled Peel and stick shelf liner and that is what I found! There are all different patterns, but the gray chevron just seemed like a fun choice that would bring gray into the decor beyond just the wall color (that we didn't feel like painting.)
Anyway, the next happy observation I made was that there was a handy dandy ruler and grid on the back! That made it measurement-free project (see pic 1.)
1. The top shelf just sits on pegs so I just took it off, held up the liner against it to get the height and width (plus an inch to curve around the front edge as sow in image 2,) and cut along the grid line.
2. With the backing still on the liner, next I folded it around the front edge an creased it.
3. Finally to adhere it to the shelf, I pulled back just the edge of the backing, lined it up and stuck it down, continuing to pull off the backing as I smoothed. *This is key to applying it smoothly and easily, instead of pealing the whole liner off the backing like a sticker. Big pieces can be hard to handle once the backing is off.
4. Fold over the front edge. Image 4 shows the bottom of the shelf (and Violet's little face :) The best part about thus stuff? If you cut it a smidge too big, fold it over!
Voila! So easy! The only difference with the bottom shelf is that it's not removable, so I had to reach in there, but it was still easy peasy. I can't wait to use the rest of it around the house. I will definitely be ordering some different patterns in the future too.
DIY #5: Burlap Pennant Name Banner
DIY #5: Burlap Pennant Name Banner
Unfortunately I don't have pics taken each step of the way for this one, but it's pretty self explanatory. I happened to have a ton of burlap scraps leftover from making Mr. and Mrs. Potato Head for Halloween a few years back :
(I made these from burlap, foam core, felt, and stuffing, then attached them to long sleeved, white shirts. The hats involved papier mache and were a lot more complicated. This was back in 2010 before I was documenting my DIYs for a blog, but I will be trying to explain the steps I took in a future post...)
Back to the banner...I made a triangle stencil out of paper so that I could trace and cut out the same size for each letter. This is a bit tricky since burlap frays so easily, but in the end that's why I hot glued them onto fabric backing. I also made stencils for the letters out of some oak tag, and used a sponge brush to layer some orange and green designs from some fancy stencils I already had. Once they were dry, I stenciled the letters right on top!.
All that was left at this point was picking the fabric backing for each letter, hot gluing the pennants and assembling it all! I chose to use hemp rope to string them, and just hot glued it behind the top edge of each triangle, leaving a bit of room for some lace that I tied on, and a wooden bead in between.
These name banners have become increasing popular and I'm seeing them in nursery decor all over the place. I made mine for a grand total of $0 with the scraps I had laying around my studio, but a cute alternative could be made with scrapbook paper! If you want to get the weathered look, but don't have burlap, crumple a brown paper bag over and over again, iron it flat (under a towel, low heat!) then back it with your choice of patterned paper, or even keep it solid! Have a few bucks to spend? Head over to Etsy and search "name banners." There are tons of beautiful options ranging anywhere from $12 to $45, but if you're like me, it's hard to justify spending money on something you can DIY!
I hope you enjoyed the second installment of Ruby's Nursery DIYs on a Budget! I hope you'll come back for round 3 where I'll describe how I made a knock off Anthropologie fabric letter and trim for my existing black Roman shades, all without even touching a sewing machine.